SIGENERGY Battery 6.0 kWh
SIGENERGY Battery 6.0 kWh
Low stock: 10 left
- 100% certified
- Ready for Installation
- Fast delivery within NL & BE
Couldn't load pickup availability
The SigenStor BAT 6.0 is a modular battery module from Sigenergy, designed for energy storage in combination with solar energy, inverters, EV chargers, and an Energy Management System (EMS). It is part of the SigenStor system and is designed for flexible deployment, with expandability, good performance, and relatively high safety.
Technical specifications
| Feature | Value / detail |
|---|---|
| Battery type | Lithium Iron Phosphate (LiFePO₄) |
| Nominal capacity (gross) | ± 6.02 kWh |
| Usable capacity | ± 5.84 kWh |
| Continuous charge/discharge capacity | 3,000 W (continuous) |
| Peak power (for short duration, e.g. 10 seconds) | ± 4,500 W |
| Voltage / voltage range | High voltage, suitable for 3-phase systems 600-900 V in combination with the correct inverter/controller |
| Protection class | IP66 – Dust and waterproof, suitable for outdoor use/outdoor enclosures provided they are protected from direct, harsh weather conditions. |
| Cooling | Natural convection (so no active fan) |
| Dimensions (W × H × D) | approx. 767 × 270 × 265 mm |
| Weight | ± 62 kg |
| Temperature range | Operating and storage temperatures: -20 °C to +55 °C (operating), storage up to approx. +60 °C, also lower limits for storage. |
| Height above sea level | Also works at higher altitudes (e.g. up to ± 4000 m) according to product specifications from some suppliers. |
| Cyclical lifespan | Approximately 10,000 cycles at 25°C and 0.5C (between charge/discharge magnitudes) |
| Warranty | 10 years |
Operation & integration
-
The module is modular : you can stack multiple BAT 6.0 modules to increase capacity. Typically, up to six modules can be stacked in a single tower.
-
It is compatible with the SigenStor Controller / Energy Controller and other components of the SigenStor system (inverters, EV chargers, EMS) so that your entire system can work in an integrated manner.
-
DoD (= Depth of Discharge) is 100%, meaning you can fully discharge the battery without any "reserve." This increases the usable capacity.
-
There is internal security: thermal sensors, multi-layered protection (hardware/software) to ensure safety.
-
Monitoring via the app (mySigen) and sometimes LED indication on the module itself to see the status (charge, discharge, fault, etc.).
1. This is provided by the battery cell manufacturer. Based on test conditions of 25±2°C, a charge and discharge rate of 0.5C
and an SOH of 60%.
2. Test conditions: 100% depth of discharge, average charge and discharge rate of 0.2C at 25°C, at the beginning of the
lifespan.
3. Refers to the usable energy capacity. The battery must be charged within 7 days of full discharge to maintain
to maintain battery health.
4. SigenStor BC must be used when connecting the Sigen Hybrid SP2/TP2 to the Sigen battery.
